ホンダトライアル履歴

Official Blog of the HONDA TRIALS HISTORY web page. More info ar www.onlytrial.com



Monday 18 January 2010

1979 Honda TL200RII




The nice TL250RII was biult by RSC, Racing Service Corporation. As the contemporary RS200T and RS220T where produced in a small quantities.

The TL200RII had a white painted fiver petrol tank, with a vertical transparent strip to see petrol level. Second productions were painted in red.

Engine was 197,74cc displacement with 1.59 Kg/m maximum torque at 4.000rpm

The frame was diamond steel, with also steel swing arm.


TL200RII had a tubular diamond steel swing arm that later was replaced for the right-angled aluminium one on the RS200T.
Front forks were 31mm diameter that also were replaced on the RS's that mounted strongest ones, 33mm diameter.

Thanks to Patrick for help with his comments!
If you have additional information please send at honda@onlytial.com or simply adding a comment clicking on "comments"

9 comments:

  1. bonjour
    sur la photo tl200R,ce n'est pas cette moto en photo c'est une tl200r2
    patrick

    ReplyDelete
  2. Merci Patrick,

    You're right,
    To be more precise model was called RS200RII
    already updated!

    ReplyDelete
  3. this model in the pics is a tl200r2,with cdi engine,the tl2002r is a rupteur engine

    ReplyDelete
  4. Thanks again Patrick for your informatiom.

    Following officila Honda TL200RII and RS200T manuals, the TL200RII was equiped with RS200TE engines (exactely same as RS200T) begining on 2001 series number, RS200T had 2511 as the first series number.

    This RS200TE engine mounted following Electrical system:

    Ignition: CDI
    Ignition trining initial: 7º BTDC at 1950rpm
    Full advance: 27º BTDC at 3.350rpm
    Spark plug: D-6ES (NGK)

    Anyway, your comments are everytime welcomed, this is the way that we together can discover more details about these nice trial bikes.

    ReplyDelete
  5. I have a bit of a mismatch 125 honda trail bike. it has and engine with numbers RS200TE 1292 in a 185 frame. it is in spain and I want to sell. But I dont know what size engine this is.

    ReplyDelete
  6. The RS200TE 1292 number engine came from the RSC 1979 engine mounted on TL200RII and RS200T Honda frames.

    The Honda Trials engine numbers usually should be matching with frame number.

    Your TL 125 was modified and now has a "super" RSC engine

    ReplyDelete
  7. Hi There, Great website!

    I have recently seen a Honda Rs200 for sale in Japan and has Rs200TF as the first part of the VIN on the frame - and Rs200T on the engine (rather than TE). This doesnt seem to tie up with the parts manual. Is this still an original bike?

    Are all RS200T engines designated TE?

    Thanks.

    ReplyDelete
  8. I have just done a top end overhaul on the RS200 and replaced the valves which had lost their hardening.As I have said before although the engine number is for RS200TE it is a 125 engine as I have checked the bore and stroke.The only problem I have had with the engine are the splines slipping on the kickstart.The engine is for sale as I have bought a standard XL125 engine to put in my frame and I would like the engine to go to a bike that can make better use of it than me. My email for reply is artmar4@hotmail.com I am open to any offers on the engine. thanks stuart marshall

    ReplyDelete
  9. I have just put a blog on regarding my rs200te engine,the kickstart is slipping on the locating rachet not on the splines of the kickstart shaft. sorry!

    ReplyDelete